Combi Cards

The hybrid cards have more than two technologies embedded inside a single smart card. These cards use any two of the below mentioned types of smart cards in a single chip. Some applications of smart card require more than two technologies like the proximity card and the Mifare card integrated in a single chip.

Categories: ,
  • Description

Description

The hybrid cards have more than two technologies embedded inside a single smart card. These cards use any two of the below mentioned types of smart cards in a single chip. Some applications of smart card require more than two technologies like the proximity card and the Mifare card integrated in a single chip.

Hybrid cards have multiple chips in the same card.

These are typically attached to each interface separately with the following other features we provide:

♦     Substrate material is PVC.

♦     Dimension: CR80 standard credit card size (3.375” * 2.125”)

♦     Personalization: As per client’s requirement.

♦     Embossing: As per client’s requirement.

♦     Barcode: As per client’s requirement.

 

Types of Hybrid cards available are:

1. Dual inlay HF + LF cards (IDT HF-LF)

2. Dual inlay HF + UHF cards (IDT HF-UHF)

3. Dual inlay LF+ UHF cards (IDT HF-UHF)

 

1. Specifications of LF

♦     4 Layer card

♦     Glossy finish

♦     Thickness: 760 microns

♦     TK4100 Chip

♦     Frequency- 125 KHz

♦     Chipset EM 4100/12

 

2. Specifications of HF:

♦     Operating frequency 13.56 MHz

♦     Thickness 760 microns

♦     Memory 1024 bits or 1024 bits*8

♦     1K bytes EEPROM or 4K Bytes EEPROM

♦     Range of operation: about 2.5” to 3.9”

♦     Data rate: 106 kbits/s

♦     True anti-collision

♦     4 bytes serial number UID

♦     8K bits, organized in 16 sectors with 4 blocks each, and 16 bytes in each block

♦     Data retention of 10 years minimum

♦     Write/ erase endurance 100,000 cycles minimum

♦     3- pass authentication: ISO/IEC DIS-9798 -2 or ISO/ IEC 14443A

 

3. Specifications of UHF:

♦     HIGGS TM-3 IC with 800 bits of non volatile memory

♦     Operating frequency 8566 MHz

♦     Aln 9662

♦     32-bit TID 64- bit unique TID 96 bit EPC memory, extensible to 480- bits

♦     512- bit user memory

♦     32- bit Access password

♦     32- bit Kill password

♦     Pre- programmed with a unique, unalterable 64-bit serial number

 

Applications:

Accommodates legacy system infrastructure while adding applications that require different e-card technologies.