RFID Bolt Seals
ID Tech Solutions provides RFID bolt seals which provides a positive barrier to unauthorised entry or tampering and are impossible to open without destroying the seal or leaving visible damage. These C-TPAT compliant bolt seals qualify as “High Security” seals and comply with ISO 17712:2013. These snapper bolts can only be used once and must be removed by bolt cutters, providing anti-theft protection as well as preventing barrier loosening and associated damage.
Protection for containers in transit
Steel bolt in a tough plastic casing
Requires bolt cutters to remove
The thick steel bolt is housed in a tough plastic case which is corrosion resistant and weatherproof, making this a top choice for outdoor use in sealing shipping containers. The bolt seals are compatible with many different barriers and posts, and each carries its own unique reference number for safety audit purposes.
Confirms to ISO 17712 : 2013 (H)
Air interface Protocol: ISO/IEC 18000-6C, EPC Class 1 Gen 2
Unique TID : 96 bit
EPC : ≥ 96 bit
User Memory : ≥ 128
Data retention : 50 years
Write endurance : 100,000 cycles
Read Range : up to 10 meter
Operating Frequency : 860-960 MHz
Operating Mode : Passive (Battery Less Transporder)
Ingress Protection: IP65
Operating Temperature : -30˚C to +80˚C
Storage Temperature: -30˚C to +80˚C
Attachment Method : Pin
Length : 80mm
Weight : 36.8 gram
Material : Carbon steel galvanization+ ABS
Length : 72mm
Weight : 39.7 gram
Material : Carbon steel galvanization+ ABS
RFID Asset Tags0 out of 5
ID Tech Solutions provides Asset Tag which is designed for fast and reliable Item identification. The passive UHF tag is designed to work on Items and suitable for wide section of Surfaces. It is designed to work for a wide range of asset identification applications such as asset management, asset Tracking, Inventory management, Entry/ Exit Permit, and Access Control. Using the Alien 9654 RFID inlay this product provides a read range of approximately 18+ feet. The inlay utilizes passive technology and is encapsulated between thin layers of polyester adding human readable printing to one side and a Asset-compatible adhesive to the other. ID Tech Asset Label is non-transferable and cannot be removed without being destroyed. A tamper-evident option with strategically placed slits in the label and adhesive layers is also available at no extra cost. The user memory is password protected and can hold encrypted user data.
RFID Jewellery Hard Tags0 out of 5
ID Tech Solutions Provides a large range of RFID jewellery hard tags, which has a smooth surface for convenient labelling of price, material, style or other information. These are very small and attractive in size & shape with multi read/write capability and also dust & Waterproof. These are Flexible Read/Write Range (reader dependant). Insensitive to almost all non metallic materials. The Jewellery Tag is specifically designed to protect high value jewellery and small, expensive accessories. Hundreds of pieces of jewellery attached with RFID Jewellery tag can be read in seconds. Very effective in taking inventory of jewellery.
RFID Cable Ties0 out of 5
ID Tech Solutions provides UHF RFID cable tie tag that has a long reading distance, which is perfectly suitable for large warehouse management. With a UHF cable tie tag and a UHF integrated reader, the reading distance could achieve 6 meters or above. The reader distance varies for different readers.
Besides, UHF’ character of anti-collision makes it much easier in practical operating. Several tags could be detected by the reader in one time, which saves a lot of time. With the RFID cable tie even metallic objects can be identified as well as objects that cannot be labelled.
RFID Jewellery Label Tags0 out of 5
RFID jewellery tags provided by ID Tech Solutions are contactless and could be written with different functions. These rfid jewellery labels specially are designed for use in jewellery market communities such as jewellery warehouse and jewellery shops management. It could meet perfectly the tracking requirement of the jewellery industry in terms of size, shape and ease of fixation. Our rfid jewellery labels is embedded in a white patented adhesive label adoptable to any type of jewellery, including rings, earrings and necklaces. And the labels enable jewellery to be quickly and reliably identified all along their distribution chain, from warehouses to point-of-sales, Whether in bags, on trays or on shelves, several pieces of jewellery can be easily
inventoried using fixed or portable RFID reading stations.
RFID Wristbands0 out of 5
ID Tech Solutions provides RFID NFC slicone wristband for RFID access control applications. RFID security access nfc silicone wristband are IP68 waterproof, durable, eco friendly, heat resistance, and anti-allergy. All our security nfc silicone wristband are available with 125 KHz LF, 13.56 MHz HF and UHF ICs. Widely used in door access control, member management, payment tracking, pet/lost tracking etc. These are re-usable RFID wristbands will integrate with Access control, Membership Management and Locker systems.
These bands can be used in gyms, health clubs, leisure clubs, swimming pools, saunas, spas, waterparks, theme parks, attractions, events, festivals, events, exhibitions, outdoor centres, hotels, schools, universities, security controlled buildings.
RFID Wire Tags0 out of 5
ID Tech Solutions provides rfid wire tags which are flexible wire-based RFID tag, that features a rugged MSOP (packaged chip) on FR4 board electronics. It has excellent read/write performance on any non-metal surface. This tag is durable enough to be embedded in concrete, plastics, fiberglass, etc and still provide reliable performance. Their flexible design allows them to be used in a wide variety of form factors. Because of their unique design, they can provide a 360° read profile to reduce orientation sensitivity. The core of this RFID tag is a small rugged circuit board with a metal wire antenna. More durable than inlay tags, these wire based tags combine strength with flexibility. A variety of encapsulations are available: high temperature Teflon or silicone, durable vulcanized rubber, and integrated cable ties. These versatile tags can be attached with a broad range of mechanical methods.
RFID Ceramic Tags0 out of 5
ID Tech Solutions provides RFID Ceramic tags of ceramic material features having better permittivity, more robust when comparing with the conventional RFID tags. ID Tech RFID provides the best-in-class ceramic RFID tags for all industrial applications. With the high dielectric ceramic core, our ceramic RFID tags have superior read performance with minimum footprints, our ceramic RFID tags are the ideal RFID tags for applications where need to attach to or embed in metal assets. The durable ceramic structure makes the ceramic tags are able to survive the harsh application environment, and some of them can withstand medical sterilization process with 150 degrees Celsius.
Typical applications for ADC ceramic RFID tags:
- RFID Tool tracking and identification
- Data center IT asset management
- Medical asset management
- Laboratory RFID application
RFID Cylinder Tags0 out of 5
ID Tech Solutions provides rfid gas cylinder tags of abs material that have good anti-metal properties, can be read and written at long distance in metal surface. It has the characteristics of high temperature resistance, water resistance, acid and alkali resistance, impact resistance, and so on. For tracking Millions of personal commercial/industrial gas cylinders on a daily basis, the manual tracking systems are tedious and error prone leading to significant losses to gas cylinder providers. The cylinders enabled with RFID technology are thus a boon for those management systems entrusted with the onerous task of maintaining inventories. Mainly used in electronic equipment, asset maintenance, gas cylinders, elevator maintenance, auto parts, high pressure boilers, high pressure vessels, high pressure pipes, lifting machinery, recreational facilities and other metal goods and special equipment management.
RFID Solar Tags0 out of 5
ID Tech Solutions Provides a specially designed range of solar tags with enhanced read range compared to standard passive UHF tags for similar usage. These tags provide absolute reliability and accuracy, with superior read rates on solar panels and modules. They are specifically designed for Solar Panels with long lasting capability in harsh environment. As per the MNRE guidelines it is mandatory that each solar or PV Module must contain an RFID tag in order to identify and track it throughout its useful life. It also contains a serial number that uniquely identifies the module. We set the entire requirement for PV modules as per MNRE, Government of India. Having an enhanced read range and reduced size, our tags are ideal for tracking solar panels, Individual panel identification, etc., Ensuring adherence to MNRE standards.
RFID Garment Tag0 out of 5
ID Tech Solutions provides garment RFID tags which are extremely soft, flexible and are made to work in extreme circumstances. These tags are so thin, that it can be applied quickly and easily in multiple ways – sewn, heat-sealed or pouched – according to your wash process needs.it was designed specifically to meet the rigors of high volume, high pressure workflows to help extend the life of your assets and have been tested in real-world to ensure guaranteed tag performance and endurance